Antimicrobial Surface Protection
& Awareness Initiative
For Commercial & Residential Properties
Choose The Right Treatment For You!
Ozone Shock or Antiviral Disinfectant
Kills 99.99% of Airborne & Surface Pathogens
We Offer Two Different Disinfectant Services - Ozone Shock, Using Ozone Generators or An Antiviral Hospital Grade Disinfectant, Applied Using The Latest Electrostatic Technology
Oxytise PiD is a Certified Safer Space® Contractor
Both the ozone, antiviral disinfection and the antibmicrobial protection treatments are suitable for residential premises (homes and apartment buildings) and commercial properties (offices, shops, warehouses, restaurants, etc).
We combine an antiviral hospital-grade disinfectant with superior electrostatic spray technology to provide complete disinfection coverage, specifically for the elimination of 99.99% of bacteria and viruses including COVID-19. However, applying a disinfectant on its own does not provide surface protection, as liquid disinfectants only work when the surface is wet and at the point of disinfection.
Once the disinfectant is wiped off or dried, it is no longer effective in killing any further microorganisms, with surfaces being recontaminated, within 1-2 hours to the same levels as prior to disinfection. This is why we always recommend two levels of protection.
As a stand-alone service, we can offer an Electrostatic Antiviral Disinfection using the highest hospital-grade disinfectant that Kills 99.99% of germs, bacteria, and viruses, including Coronavirus within 5 minutes of contact.
Food safe, eco-friendly, and suitable for use around IT equipment, this disinfectant is charged on exiting the device, wrapping around it's targeted surface, resulting in 360-degree coverage. We can provide 'before and after' test swabs, verifying our application has been successful, and a Certificate of Completion.
We would recommend, after the disinfection application, you apply an antimicrobial surface coating, as liquid disinfectants only work when the surface is wet and at the point of disinfection.
Antimicrobial 60 Day Protection
Applied After The Disinfection or Ozone Sanitisation Treatment
INDEPENDENTLY TESTED BY INTERNATIONAL STANDARDS TO SHOW EFFICACY AT 60 DAYS AGAINST THE HUMAN CORONAVIRUSPROVEN TO INCLUDING COVID-19
(ISO 21702 (60 Day efficacy against human coronavirus)
Using Electrostatic Technology, we will disinfect using a hospital-grade antiviral disinfectant to kill 99.99% of pathogens, to ensure a complete surface disinfection. We will then apply a preventative, 60 day antimicrobial surface coating ,using Electrostatic technology.
This Electrostatic technology will create a 3-D effect resulting in 360-degree surface coverage
We can provide 'before and after' test swabs - verifying our application has been successful, Certificate of Completion, Awareness Stickers and Safer Space Accreditation.
Daily defence for your family workforce and customers
No harsh chemicals - alcohol free- eco friendly
Get that edge over your competitors!
Enhance businesses surface hygiene levels by implementing a sustainable program and coating that promotes consumer confidence and safe workplace operations.
THE ONLY LONG TERM ANTIMICROBIAL SCIENTIFICALLY PROVEN TO BE EFFECTIVE AGAINST THE CORONAVIRUS FOR 60 DAYS!
After the disinfectant is dry, we apply an environmentally-friendly, preventative, antimicrobial surface coating using superior electrostatic spray technology.
This revolutionary, water-based, antimicrobial coating can be applied to almost any surface, providing 60-day protection, enabling an entirely new level of safety in your facility. Once dried, it forms an invisible layer of “nanospikes” that penetrate and destroy cell membranes, killing pathogens on contact. Due to these “nanospikes”, our product’s process of elimination is mechanical instead of chemical and extremely effective in both high and low traffic areas.
The active ingredient in the coating is ECHA (European Chemicals Agency) registered and compliant. Results are verified using a swabbing process, before disinfection and on completion of the coating application.
Reapply every 3 months or as needed
Works with most cleaning systems
Persistent and efficient level of protection
Helps support risk reduction
Eliminate human error in cleaning
An Introduction To Electrostatic Application Technology?
Electrostatics is a proven technology in the agricultural and automotive industries. This technology is now being integrated into workplaces and healthcare settings as a tool to break the chain of pathogen mobility.
Most surface areas are neutral (uncharged) or negative. Electrostatic application for surface treatments is a method of applying disinfectants/antimicrobial coatings to a target surface area by utilising an electrostatic force of attraction. Simply put, the electrostatic system places an electrical charge* on the droplets and disperses them across a target surface area providing comprehensive, even 360-degree coverage.
This provides a consistent and uniform coverage in which the droplets adhere to vertical, horizontal and three-dimensional surfaces (“wraps” around the target area).
As proven in the agriculture and automotive industries, this electrostatic application process takes little time to achieve the desired effect.
As a SAFER SPACE® Certified Contractor, we have undertaken a robust training programme and passed an audit process on the latest sanitising techniques and antimicrobial coatings and are committed to delivering the highest standards of hygiene. In using Oxytise your business will be designated a SAFER SPACE® for demonstrating the highest standards of cleaning and hygiene.
We don't provide a 'cleaning service', but rather an Ozone Odour Removal and Sanitisation Service or alternatively we provide an Electrostatic Antiviral Disinfection, killing 99.99% of pathogens. We would strongly suggest, having received either of the aforementioned treatments, our Electrostatic Antimicrobial Surface Coating, is applied, to protect from pathogen contamination for 30 days. With our superior Electrostatic process, we don't just disinfect but protect and our two-level approach, is verified before and after treatment applications;
Why Antimicrobial Protection Is Important -Since the beginning of time,
human's most lethal enemy has
been the Pathogen -
It is now widely acknowledged that the environment and surfaces are significant sources of microbiological contamination and are considered major vehicles for harmful micro-organisms to cause infection (cross-infection). Bacteria and viruses can contaminate surfaces and can form bio-films that are extremely resilient to cleaning. Harmful micro-organisms can be transferred by cross-contamination via touch, or the air in the form of aerosols (in water droplets) or generally as single cells or “clumps”.